Landing Pads
Water Slide Landing Pads Are More Than Just Aesthetic Features
They play an important role in water park safety by reducing and preventing abrasions and impact injuries. An important consideration in choosing a landing pad is not only a pad’s ability to resist becoming a breeding ground for fungi and bacteria, but also to be safely mounted without the use of metal bolts or screws that will rust or cause injury. Nylon surface anchors, commonly referred to as bantam plugs, can crack from repeated impact, resulting in the pad loosening, shifting and potentially becoming a safety hazard.

Safer Softer Landings Above and Below the Water Line
SlidePad® and EdgePad™ were designed to replace old, unsafe landing surfaces.
SlidePad® has enhanced the safety aspects and softness of the landing surface by featuring beveled edges and a top landing surface from Life Floor, the #1 aquatic flooring in the industry. Life Floor’s proprietary RIPPLE 2.0 texture landing surface provides a slip-resistant surface that is NSF/ANSI/CAN 50 rated and meets critical fall height requirements. EdgePad™ are the only aquatic pads that feature certified safety landing surfaces.
Drilling holes and installing bolts in the pool floor increases the probability of water leaks, surface cracks and creates a safety hazard. SlidePad® has eliminated the need to drill holes or install either landing surface with bolts! Both SlidePad® and EdgePad™ can be glued to any type of pool floor or decking surface and is guaranteed not float or shift after installation. Our landing pads are not only chlorine resistant, but also resistant to UV exposure, impervious to water and are fungistatic and hygienic.

SLIDEPAD®
SlidePad® was designed to replace old, unsafe landing pads.
- Install at the end of slides, pool floors or any area requiring a slip-resistant safe landing.
- Guaranteed not to float!
- Soft beveled edges and borders reduce trip hazards.
- Custom sizes available!

EDGEPAD™
EdgePad™ is designed to protect guests from accidental falls occurring on pool edges, play areas, obstructions and pool side walls.
- Provides critical fall protection from 60”, or 5 feet.
- Can be custom-made to accommodate any pool gutter pattern.
- Install at the edge of any pool requiring a slip-resistant protective corner.
- EdgePad™ can be customized to fit a variety of pool edge configurations.
SlidePad® and EdgePad™ are available in custom sizes, manufactured to customers’ specifications. Standard SlidePads® are in stock and available for immediate shipment:
Color: Bluebird, Texture: RIPPLE 2.0, Thickness: 2”, Sizes: 3’x4’, 3’x5’, 4’x6’, 4’x8’
Traditional Landing Pads vs. SlidePad® Products:
There is no Comparison!
Commonly used landing pads are constructed of several layers of laminated foam glued together on top of a thin PVC base. The entire pad is then wrapped in a layer of vinyl pool liner material. Repeated impact results in a breakdown in the foam’s density, causing the vinyl to peel away at the edges and cracks to form.
Benefits of SlideRenu Landing Pads
Durable Construction
No moving parts! SlidePad® products are single units comprised of fade, resistant EVA/XLPE closed cell foam technology. The safety aspects and softness of our pads feature top landing surfaces from Life Floor, the #1 aquatic surface flooring in the industry. SlidePad® will not disintegrate, deteriorate, crack, fade and will not shift or move after being bonded to the surface.
Versatility
Use at the end of slides, pool bottom and any area that requires a slip-resistant, soft, safe landing. Use below the water’s surface, indoors or outdoors. Comes with a DIY installation kit using the strongest glue on the planet.
Safety
Unlike competitor’s products, SlidePad® does NOT require external fasteners, screws or anchor bolts that compromise the safety of your guests. The Life Floor landing surface is easily cleaned and maintained and does not support microbial growth such as mold and mildew.
Low Maintenance
Airtight construction means that no maintenance is required! SlidePad® products are not only resilient to impact but chlorine resistant, UV-resistant, hygienic, fungistatic, algae resistant and slip-resistant despite repeated use.
Easy Installation
Quick and easy installation! No bolts, screws or fasteners. Drilling into your pool’s floor to install anchor mounts isn’t necessary. SlidePad® adheres to any prepared surface using SlidePad® Adhesive™. SlidePad® will not detach and float to the surface and can be installed by your staff or one of our certified technicians.
Customizable
SlidePad® and EdgePad™ products can be constructed to your specific measurements. Custom shapes are also available.
Slip-resistant Surface
Life Floor’s proprietary RIPPLE 2.0 landing surface provides a slip resistant surface that is NSF/ANSI/CAN 50 rated and meets critical fall height requirements
Watertight
The Life Floor landing surface and closed cell cushion foam are impervious to water and is hygienic, fungistatic and algae resistant.
Limited Warranty
2 YEAR limited warranty against surface cracking, fading*, disintegration, foam compression and loss of slip resistant properties. (*Chemical fading based on chemicals outside of ideal range.)
SlidePad® and EdgePad™ may be Customized Specifically for your Waterpark

How Do We Compare
Will Not Discolor Or Mold
AquaticPads™ products retain color and non-slip properties and are hygienic, fungi-static and algae resistant.
No Cracking Or Peeling
AquaticPads™ products are not constructed with pool lining that cracks and peel with repeated use. SlidePad® will NOT crack, peel or wear away.
No Metal Fasteners
AquaticPads™ products are installed without unsafe external fasteners that loosen and rust.
Surface Will Not Wear Away On Edges
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam onummy nibh euismodtincidunt ut laoreet dolore magna.
Withstands Impact
Our EdgePad™ products are resilient to repeated impact and retain their slip resistant texture. Edgepad™ is available in a variety of pool configurations.
Will Not Disintegrate
AquaticPads™ products are warranted against cracking, peeling and loss of foam compression.
NO MOVING PARTS
AquaticPads™ products are a single unit. No moving pieces or parts that will crack with repeated impact.
US | THEM | |
---|---|---|
Foam | One Piece of High Density Compression Deflection Foam | 3 Layers of Foam Glued Together |
Thickness | 1/2" to 6" | 1" to 4" |
Common Failures | None, No Moving Parts | Vinyl Cracks, Bolts Loosen and Rust, Foam Loses Resilience |
Sizes | In stock, 4 standard sizes Unlimited custom sizes |
4 |
Standard Delivery Time | Standard sizes available for immmediate shipment | 1 to 4 weeks |
Slip Resistance | Life Floor RIPPLE 2.0 texture slip-resistant surface |
Textured Vinyl |
Landing Surface | NSF/ANSI/CAN 50 rated | Vinyl Pool Liner |
Installation Method | Adhesive, no special tools hardware or tools required | Metal bolts or screws attached to anchors drilled and mounted into pool floor |
The Most Common Landing Surface Failures
- Fading, discoloration
- Disintegration
- Corner cracking that causes scrapes and water to enter into the pad
- Rusting and missing bolts/fasteners
- Stress cracking in a PVC base from repeated impact
These traditional corner pads haven’t kept pace with the ever-changing demands brought about by salt, bromine and super chlorination water chemistries. Additionally, complex interactive water features require safer and softer protective corners.
“Old Technology” edge pads are made of laminated foam wrapped in a layer of vinyl pool liner material. Repeated impact causes a breakdown foam density, causing the vinyl to peel away, exposing the foam core.








